Planning polyhouse farming in Ganjbasoda? Ganjbasoda is a town in Madhya Pradesh[1], about 530 km from Delhi. Below we use the town's monthly temperatures, humidity and rainfall to work out which structure fits, which crops to grow and in which months, before you spend on construction.
Climate for polyhouse farming in Ganjbasoda
May is the hottest month in Ganjbasoda, with average daily highs of about 43°C. January has the coolest nights, averaging 9°C.[2] The area gets about 1,144 mm of rain a year, most of it in June to September, peaking in July at about 379 mm. Average humidity stays at 75% or more in July to September, which raises the risk of leaf disease and slows evaporative cooling. On the Köppen–Geiger climate map, Ganjbasoda falls in the hot-summer Mediterranean zone (Csa).[3]
Ganjbasoda climate by month
Month
Avg high (°C)
Avg low (°C)
Humidity (%)
Rain (mm)
Jan
25.2
8.5
42
11
Feb
29.4
11.7
36
13
Mar
34.9
17.0
27
12
Apr
40.4
23.1
19
5
May
43.0
27.9
22
12
Jun
38.5
27.3
50
162
Jul
31.5
24.2
80
379
Aug
29.5
23.2
87
357
Sep
29.9
21.8
83
152
Oct
29.9
18.1
68
24
Nov
28.1
13.5
57
11
Dec
25.8
9.6
49
6
Area averages (a grid cell of about 50 km) for 2001–2025, from NASA POWER, centred on Ganjbasoda. Rainfall and night temperatures at your plot can differ, especially near hills and the coast.[2]
Advantages of protected cultivation in Ganjbasoda
1
Year-round crops
Under cover, lettuce can be grown for 10 months a year in Ganjbasoda, so you can supply buyers every week instead of one open-field season.
2
Better yield and price
Plants grow without rain, hail and wind damage, so yields are higher and more even, and clean, graded produce sells at a better price, especially off-season.
3
Less water
Drip irrigation under cover uses less water than flood irrigation, and the roof keeps July's 379 mm of rain off the crop and the soil.
4
Less pesticides
Insect net on vents and doors keeps out most pests, and controlled ventilation helps with leaf disease in the humid months (July to September), so you spray less often.
5
Subsidy eligible
Polyhouse, shade net and nethouse projects in Madhya Pradesh can apply for Mission for Integrated Development of Horticulture (MIDH) assistance through the state horticulture department.[4]
Which polyhouse suits Ganjbasoda?
For polyhouse farming in Ganjbasoda, the structure decides which months you can crop and what it costs to run. The heat in Ganjbasoda comes with dry air. In April to June, average highs reach 43°C while average humidity is only about 30%. In that dry air, wet pads can bring a 43°C May afternoon down to roughly 31°C inside a Fan & Pad polyhouse, which keeps herbs and vine crops going; lettuce will still struggle in the hottest weeks. For vine crops such as capsicum and cucumber, a naturally ventilated polyhouse with a shade screen works from February and August to November and costs less to run.
Plan for heavy rain in July (about 379 mm): raise the plinth, size the gutters for that month and keep drains away from the nutrient tank. Sunlight peaks in May at about 7.2 kWh per m² a day, so add a shade screen for leafy greens in the brightest months. A nethouse, the lowest-cost option, can grow hardy crops in February and October to November, when it is mild and fairly dry.
Crops for Ganjbasoda
Based on Ganjbasoda's climate, the crops with the longest growing windows are lettuce (10 months), tomato (9 months) and cucumber (9 months). Lettuce fits July to April with Fan & Pad cooling. These are the crops we would plan first for polyhouse farming in Ganjbasoda.
Months each crop suits in Ganjbasoda
Crop
Naturally ventilated polyhouse
With Fan & Pad cooling
Capsicum
Feb and Aug–Nov
Feb–Apr and Jul–Nov
Tomato
Feb and Aug–Dec
Feb–Apr and Jul–Dec
Cucumber
Jul–Nov
Mar–Nov
Chilli pepper
Feb and Jul–Nov
Feb–Apr and Jun–Nov
Brinjal
Jul–Nov
Mar–Apr and Jun–Nov
Lettuce
Dec–Jan
Jul–Apr
Broccoli
Difficult
Nov–Mar
Strawberry
Difficult
Nov–Feb
Rose
Dec
Feb–Mar and Oct–Dec
Gerbera
Dec
Feb–Apr and Aug–Dec
Carnation
Difficult
Nov–Mar
Chrysanthemum
Dec
Feb–Mar and Oct–Dec
Anthurium
Aug–Oct
Mar–Apr and Jun–Oct
Orchids
Aug–Oct
Mar–Apr and Jun–Oct
Lilium
Difficult
Nov–Mar
Kryzen planning estimate from the monthly averages above and each crop's usual day and night temperature range. Variety, soil or substrate temperature and shading change the result, so confirm with a trial.
₹5,589Spending per person per month, urban Madhya Pradesh, 2023–24[5]
530 kmto Delhi, the nearest metro (straight line)
Urban households in Madhya Pradesh spent an average of ₹5,589 per person per month in 2023–24, below the all-India urban average of ₹7,078.[5] Local demand in Ganjbasoda may be small for exotic greens, so plan where the rest of the harvest goes. Vidisha, about 40 km away, is the nearest larger market on our list.
Polyhouse farming in Ganjbasoda with Kryzen
We have built 8 projects in Madhya Pradesh so far (see our project map (opens in a new tab)). Ganjbasoda is about 520 km in a straight line from our Chhatrapati Sambhajinagar warehouse, our nearest site.
Towns near Ganjbasoda
We also plan and build farms in these towns near Ganjbasoda:
Map: LGD 2024 boundaries via bharatlas, CC BY 4.0. For illustration only.
Polyhouse farming in Ganjbasoda: FAQs
Can a polyhouse farm run all year in Ganjbasoda?
Yes, with the right structure. For Ganjbasoda we would plan a Fan & Pad polyhouse for leafy greens. Even then, lettuce is hard to grow in May to June, so plan another crop for those months.
Which polyhouse is best for Ganjbasoda?
With May highs of about 43°C and 22% average humidity in that month, we would start with a Fan & Pad polyhouse for leafy greens.
Which crops should I grow in a polyhouse in Ganjbasoda?
Going by the monthly climate, lettuce, tomato and cucumber have the longest growing windows. Confirm prices and volumes with buyers before you plant.
Is polyhouse farming profitable in Ganjbasoda?
It can be, if the crop, the structure and the buyers match. In Ganjbasoda, lettuce and tomato have the longest seasons under cover. Confirm prices and volumes with buyers first; our Detailed Project Report works out the cost, yield and returns for your plot.
Does Kryzen build polyhouses in Ganjbasoda?
Yes. Our nearest site is our Chhatrapati Sambhajinagar warehouse, about 520 km away, and we have built 8 projects in Madhya Pradesh.
Is there a subsidy for polyhouse or hydroponic farms in Madhya Pradesh?
Yes. Protected cultivation projects in Madhya Pradesh can apply for Mission for Integrated Development of Horticulture (MIDH) assistance through the state horticulture department. Check the current rate and area limit when you apply.
Discuss your Ganjbasoda farm project
Share your plot location, water test and crop targets. We will suggest the right structure and growing system, and send an itemised quotation.
A computer engineer turned hydroponic farmer from a multigenerational farming family in Satara. Sudhir founded Kryzen in 2019, and the team has since built 350+ protected and hydroponic farms across India.
